Standard Features:
- Universal
Dual Test Stand for Testing Components and Pumps
1. Dual Independent Pressure Systems for Testing
Components
2. Pump Test Unit for Testing Pumps
- Four
Pumps
1. System A Pressure Compensated Piston Pump
2. System B Pressure Compensated Piston Pump
3.Auxiliary Low Flow Pump
4. Air over Oil Intensifier Pump
- System
A&B
- Will Deliver Different Pressures and Flows
Simultaneously
- Two Separate Work Stations for System A & B
- System A and System B Have Each of the Below
1. Complete Pressure and Flow Adjustment
2. Two Each Pressure and Return Ports
3. Test Quality, Mirror Dial Pressure Gauges for
Exact Readings (1500 PSI, 3000 PSI, and 6000 PSI
.25% Accuracy) *Gauge Savers on 1500 and 3000 PSI
Gauges
4. Supply and Return Flow (4% Accuracy)
5. Safety Over Pressure Relief Valve
6. By-Pass Dump Valve
7. Flow Shut-Off Valve
- Auxiliary
Low Flow Pump
1. Will Deliver 3 GPM @ 3500 PSI
2. By-Pass Dump Valve
3. Flow Adjustment
4. Flow Meter
5. Pressure Adjustment
6. Pressure Gauge
7. Dedicated Port
|
- Air
Over Oil Intensifier
1. Air Shut-Off Valve
2. Air Regulator
3. Air Pressure Gauge
4. Safety Over Pressure Relief Valve
5. By-Pass Dump Valve
6. Dedicated Port
- Manual
4-Way Directional Flow Control
Valve for Testing Cylinders
- Internal
Leakage Tester (Low Flow Meter for Testing
Internal Leakage of Components .5-4 GPM Standard)
- Operational
Warning Lights
1. Pressure Filter Condition
2. Return Filter Condition
3. Reservoir Low Level
4. Oil Over Temperature
- Three
Each Isolated Pressure (Stand Alone Pressure
Gauges, Pressure Ranges Other Than The Three Main
System Gauges) *Suggested Ranges
60 PSI, 600 PSI, 6000
PSI
- Oil
Temperature Gauge
Automatic Oil Temperature Control
- Additional
Features:
- Over Head Work Sink Lights
- Test Port for all Pressure Gauges
- Fluid Sample Port
- Safety Drip Pan Completely Covers Bottom
- Work Sink with Perforated Metal Grating
- 14 Gauge Stainless Steel Construction
- Heavy Duty Swivel Castors with Floor Locks
|
