VARIABLE FREQUENCY DRIVE - PUMP TEST STAND


Model 05-961-05

Features:
  • Precise RPM Electrical Drive
  • Adjustable Speed ( 0-6,000 PSI)
    ( Higher RPM Available)
  • Pressure Up to 5000 PSI
  • Test Quality 6" Mirror Dial Pressure Gauges ( .25%)
  • Direct Reading High Pressure Flow Meter( 5%)
  • Supply - Charge Pump ( Maximum Flow)
  • Supply - Filter ( 3 Micron)
  • Return Filter ( 3 Micron)
  • Digital Readout, RPM, Frequency, Rotation and Load
  • Stainless Steel Construction
  • Water to Oil, Oil Cooler with Modulation Valve
  • Sound Proof Insulation
  • Supply Port
    A. Oil Temperature Gauge
    B. Supply Pressure Gauge (0-600 PSI)
    C. Throttle Valve
    D. Pressure Adjustment (0-500 PSI)
    E. Air Bleed Valve
  • Pressure Port
    A. Oil Temperature Gauge
    B. Pressure Gauge (0-6000 PSI)
    C. Load Valve ( 0-5000 PSI)
    D. By-Pass Valve
    E. Flow Meter
  • Case Drain Port
    A. Oil Temperature Gauge
    B. Pressure Gauge (0-600 PSI)
    C. Load Valve
    D. Flow Meter

Model By Fluid Type

HTTP/1.1 100 Continue
Model Number DC Drive
Maximum
Horse Power		 Supply Pump
Maximum Flow
(GPM)		 Reservoir
Capacity
(Gals)		 Weight
(Pounds)		 Length
(inches)		 Width
(inches)		 Height
(inches)
05-960-06 50 80 100 3800 65 86 77
05-961-06 75 100 150 4300 70 96 77
05-962-06 100 100 175 5000 80 96 77
05-963-06 125 100 175 5700 80 100 77
05-964-06 150 125 200 6700 80100 77
05-965-06 175 125 200 7200 86 100 77
05-966-06 200 125 200 8400 96 110 77

Contact A&P Hydraulics' Engineering Staff
for Complete Drawings and Schematics



 

 

Copyright A&P Hydraulics, Inc., All rights reserved.
A&P Hydraulics reserves the right to change specifications with out notice.