• Four Pumps
  1. Pressure Compensated Piston Pump
  2. Auxiliary Low Flow Pump
  3. Air over Oil Intensifier Pump
  4. Charge/Supply Pump for Pump Test Unit
• System Controls
  1. Complete Pressure and Flow Adjustment
  2. Return Back Pressure with Pressure Control & Gauge
  3. Test Quality, Mirror Dial Pressure Gauges for Exact Readings (1500 PSI, 3000 PSI, and 6000 PSI .25% Accuracy) *Gauge Savers on 1500 and 3000 PSI Gauges
  4. Supply and Return Flow (4% Accuracy)
  5. Safety Over Pressure Relief Valve
  6. By-Pass Dump Valve
  7. Flow Shut-Off Valve
• Auxiliary Low Flow Pump
  1. Will Deliver 3 GPM @ 3500 PSI
  2. By-Pass Dump Valve
  3. Flow Adjustment
  4. Flow Meter
  5. Pressure Adjustment
  6. Pressure Gauge
  7. Dedicated Port
• Hand Pump
  1. By-Pass Dump Valve
  2. Pressure Gauge
  3. Dedicated Port
• Ports
  1. Dual Pressure Ports
  2. Dual Return Ports
  3. Dedicated Port
• Manual 4-Way Directional Flow Control
  Valve for Testing Cylinders
  *Electrical 4-Way Valve with Port Indicator Lights Available
• Internal Leakage Tester (Low Flow Meter for Testing Internal Leakage of Components .5-4 GPM Standard)
• Operational Warning Lights
  1. Pressure Filter Condition
  2. Return Filter Condition
  3. Reservoir Low Level
  4. Oil Over Temperature
• Two Each Isolated Pressure (Stand Alone Pressure Gauges, Pressure Ranges Other Than The Three Main System Gauges) *Suggested Ranges 200 PSI and 1500 PSI
• Oil Temperature Gauge
  Automatic Oil Temperature Control
• Additional Features:
  - Over Head Work Sink Lights
  - Test Port for all Pressure Gauges
  - Fluid Sample Port
  - Safety Drip Pan Completely Covers Bottom
  - Work Sink with Perforated Metal Grating
  - 14 Gauge Stainless Steel Construction
  - Heavy Duty Swivel Castors with Floor Locks
• Universal Test Stand for Testing Components and Pumps
  1. Pressure System for Testing Components
  2. Pump Test Unit for Testing Pumps
• Pump Test Features:
  - The Pump Test Unit (PTU) is Designed for Testing All Fixed and Variable Displacement Pumps
  - The PTU uses the Main Pressure Compensated Pumps to Drive a Hydraulic Motor for the Prime Mover)

Pump Test Unit Features:

• Adjustable Speed (0-6000 RPM)
  (10,000 RPM Available
• Reversing Valve
• Maximum Test Pump Flow (85% of Test Stand's Maximum Flow)
• 5000 PSI Pressure Systems
• Charge Pump for Pump Supply
• Charge Pump Supply Filter
• Charge Pump Return Filter
• Condition Warning Lights for Supply and Return Charge Pump Filters
• Digital RPM Tachometer
• Supply Port
  A. Supply Throttle Valve
  B. Supply Pressure Adjustment
  C. Pressure Valve (0-400 PSI)
  D. Oil Temperature Gauge
  E. Air Bleed Valve
• Pressure Port
  A. Load Valve
  B. By-Pass Dump Valve
  C. Pressure Gauge (0-5000 PSI)
  D. Oil Temperature Gauge
  E. Flow Meter
• Case Drain Port
  A. Load Valve
  B. By-Pass Dump Valve
  C. Pressure Gauge (0-600 PSI)
  D. Oil Temperature Gauge
  E. Flow Meter