Heavy Duty, Hydraulic Power Units

Standard Features Included: Dual Systems,
Dual Digital Flow Meters, Digital Pressure Gauge,
Digital Oil Temperature Gauge and Quadruple Filtration



Model Number 05-735-00

730
Series

  • Panel Mounted Controls for Ease
    of Operation and Safety
  1. Dual system Will Deliver Two Separate
    Flows at Same Pressure
  2. Pump Flow Adjustment
  3. Pump Pressure Adjustment
  4. By-Pass Dump Valve
  5. System A & B Flow Control Valves
  6. Emergency Stop Switch
  • Super Clean, Quadruple Filtration
  1. Pressure Filter (1 Micron)
  2. Return Filter (3 Micron)
  3. By-Pass Filter (3 Micron)
  4. Pump Case Drain Filter (3 Micron)
  • Operational Warning Lights
  1. Pressure Filter Clogged Warning Light
  2. Return Filter Clogged Warning Light
  3. Oil Over Temperature Warning Light
  4. Reservoir Low Level Warning
  5. Operational Warning Rotating Beacon
  • Instrumentation
  1. Dual Digital Flow Meter (1% Accuracy)
  2. Digital Pressure Gauge (.5% accuracy)
  3. Digital Pyrometer / Oil Temperature Gauge
  4. Protective Cover for Digital Readout Meters
  5. Hour Meter
 Features:
  • Dual System Includes:
    A. Dual Digital Flow Meters
    B. Dual Flow Control
    C. Dual Return  Shut-Off Valves
    D. Dual Pressure and Return Hoses
  • All Welded, 14 Gauge Stainless Steel Construction
  • Lincoln® Motor 5 Year Warranty 3 Phase
    (Available in 10 Voltages)
  • Oilgear® Pressure Compensated Piston Pump
  • Extra Large Oil Cooler with Fan
  • Heavy Duty Castors With Floor Locks
  • Stainless Steel Reservoir (150 Gallons)
  • Reservoir Desiccant Air Filter
  • Reservoir Selector Valve
    (Use Either Unit's or Aircraft's Reservoir)
  • Pressure & Return Hoses (25 ft.)
  • Electrical Input Cable (50 ft.)
  • Safety Pan Completely Cover Bottom for
    Guaranteed Clean Floors
  • Fluid Sample Port with Valve
  • Heavy Duty 2" x 3" Frame with Fork Lift Brackets &
    Tie Down Brackets
  • Rear Doors & Removable Top for Ease of Maintenance
  • Dimensions: Inches (cm)
    Length  116 In (294 cm)
    Width 76 In (193 cm)
    Height 50 In (127 cm)


 

 

Specifications:
SERIES
MODEL		 Max PUMP PRESSURE
PSI (bar)		 MOTOR
HP (kW)		 PUMP FLOW

50 Hz                60 Hz
GPM (lpm)         GPM (lpm)

 WEIGHT
Lbs. (kg)
05-733-** 450 - 4250 PSI
30 - 290 bar		 100 HP
75 kW		 50.4 GPM               60 GPM
190 lpm                  227 lpm		  6000 lbs
2721 kg
06-733-** 450 - 5500 PSI
30 - 374 bar		 150 HP
112 kW		 50.4 GPM               60 GPM
190 lpm                  227 lpm		  3750 lbs
3061 kg
05-735-** 450 - 4250 PSI
30 - 290 bar		 150 HP
112 kW		 59 GPM               70 GPM
223 lpm                264 lpm		  6900 lbs
3130 kg
05-735-** 450 - 4250 PSI
30 - 290 bar		 175 HP
130 kW		 59 GPM               70 GPM
223 lpm                264 lpm		  7100 lbs
3220 kg

 

Model By Fluid Type:
MIL-H-5606 MIL-H-83282 Skydrol MIL-PRF-87257
05-733-02 05-733-03 05-733-05 05-733-06
06-733-02 06-733-03 06-733-05 06-733-06
05-735-02 05-735-03 05-735-05 05-735-06
05-735-02 05-735-03 05-735-05 05-735-06

 

Options Available:

Option - A - 50 ft. Hoses
Replaces standard 25 ft. Hoses (Note) Two sets
required with dual system option

Option - F - High Pressure Hand Pump (10,000 PSI)
Adds high pressure hand pump for testing components
Includes Pressure gauge and 15 ft. hose

Option - G - Voltage Monitor
Adds a feature in the event an incorrect input
voltage, phase loss, incorrect phase sequence, low voltage,
high voltage and or unbalanced voltage occurs
(Specify voltage)

Option - M - Hand Pump for Reservoir Servicing (500 PSI)
Adds hand pump for servicing aircraft's reservoir
Max Includes pressure gauge, filter, and 20 ft hose

 Option - N - Towing / Trailer Package
Adds rubber tires, Heavy duty suspension, hand brake
for towing between hangers

Option - P - Reservoir Overflow Hose
Adds a over flow hose from aircraft's reservoir
to unit's reservoir

Option - Q - Calibration Port
Adds the capability to attach a test gauge to instrument
panel to calibrate pressure gauge to rated capacity of
the hydraulic power unit

Option - T - Return Back Pressure with Return
Sight Glass
Controls return hose back pressure. Sight glass included

Option - U - Return Sight Glass
Adds sight glass to monitor possible air in return
line fluid
 

 

 

    

 

 

Copyright A&P Hydraulics, Inc., All rights reserved.
A&P Hydraulics reserves the right to change specifications with out notice.